Reviewed by the Professional Sandpaper Guide editorial team, with technical input from flooring industry professionals with 25+ years of experience in abrasives manufacturing. Grit sequences align with NWFA Sand & Finish Guidelines.
Choosing the right sandpaper grit for floor sanding isn't guesswork — there's a specific sequence that professionals follow on every job. Using the wrong grit wastes time, damages floors, and leaves scratch marks that show through your finish. This chart covers every grit you'll encounter, which machine to use it on, and how many sheets to budget for a standard room.
Aluminum oxide on heavy cloth backing. Drum sheets, edger discs, and buffer screens.
Shop Virginia Abrasives on Amazon →
As an Amazon Associate, we earn from qualifying purchases at no extra cost to you.
Print this chart and take it to the rental shop. Download the Floor Sanding Grit Chart (PDF) — one page with the grit sequence, machine compatibility, and sheet counts by room size.
Quick Reference Chart
| Scenario | Grit Sequence | Machine | Sheets / 200 sq ft |
|---|---|---|---|
| Full refinish over old poly | 36 → 60 → 80 → 100 | Drum sander | 4–6 per grit |
| Bare wood (no old finish) | 60 → 80 → 100 | Drum sander | 3–4 per grit |
| Edger (perimeter) | Match drum grit at every stage | Clarke Super 7R | 4–6 discs per grit |
| Buffer — clear coat prep | 120 screen | Buffer / polisher | 2–3 screens |
| Buffer — stain prep | 150 screen | Buffer / polisher | 2–3 screens |
| Between finish coats | 180–220 screen | Buffer / polisher | 1–2 screens |
The one rule you cannot break: Never skip more than one grit. Each grit erases the scratch pattern of the grit before it. Skip a grit and those scratches show through your finish — invisible under dust but obvious under polyurethane or stain.
Grit-by-Grit Breakdown
36 Grit — The Heavy Cut
36 grit is the most aggressive sandpaper you'll use on a hardwood floor — designed for removing old finish. Heavy polyurethane, paint, old varnish, adhesive residue — 36 grit cuts through all of it. Only use 36 when there's a thick coating to remove. On bare wood, 36 is too aggressive and will leave deep scratches that take multiple passes to erase.
Virginia Abrasives 8×19.5-inch drum sander sheets in 36 grit use aluminum oxide on heavy cloth backing. Budget 4 to 6 sheets per 200 square feet — heavily coated floors eat through coarse sheets fast. Change the sheet as soon as it stops cutting aggressively; a dull coarse sheet glazes the finish instead of removing it.
60 Grit — The Transition Cut
60 grit removes the deep scratch pattern left by 36 and reveals clean, smooth wood. If starting on bare wood, 60 is your first pass. The transition from 36 to 60 is the most important grit change in the entire process. Skip 60 and the 36-grit scratches reappear the moment you apply finish — they hide under dust but show under polyurethane or stain.
At 60 grit, the floor should look uniformly clean. If you still see patches of old finish at board edges or in low spots, you need another 36-grit pass in those areas or the floor has cupping that requires more aggressive leveling. See our troubleshooting guide for cupped and uneven floors.
80 Grit — The Workhorse
80 grit is where the floor starts looking like a floor again — the most-used grit in floor refinishing. Virginia Abrasives 80/100 combo packs save about 15% versus buying each grit separately.
Pro tip: After running 80 grit, wipe the floor with a damp rag and let it dry for 10 minutes. The moisture raises any scratch marks hiding under dust. If you see scratches, run another 80-grit pass before moving to 100. Much easier to catch now than after finish. For a detailed comparison, see 80 Grit vs 100 Grit Sandpaper for Floors.
100 Grit — The Final Drum Pass
100 grit is your last drum sander pass. The wood should feel smooth with the grain and show no visible scratch lines when you shine a bright light at a low angle across the surface. This low-angle light test is how professionals verify their work.
Don't take the drum sander beyond 100. Finer grits belong on the buffer, where the machine's orbital action blends scratch patterns. Running 120 on a drum sander can burnish the wood, closing the grain and causing uneven stain absorption.
120–220 Grit — Buffer and Screen
The buffer blends the drum sander's straight-line scratch pattern with the edger's semicircular pattern. Use 120 grit for clear coat prep, 150 for stain prep (finer scratch accepts stain more evenly), and 180–220 between coats of finish.
Between coats of polyurethane, you're scuffing the surface so the next coat bonds — not removing wood. A 180 or 220 screen does this without cutting through the previous coat. Vacuum thoroughly and wipe with a tack cloth before the next coat. Dust trapped between coats creates visible bumps in the final finish.
CAMI vs FEPA: Two grit rating systems exist. CAMI is standard in North America; FEPA (prefixed with "P") is international. They're close at coarse grits but diverge above 220 — a FEPA P100 is roughly equivalent to a CAMI 120. Virginia Abrasives and all U.S. rental shops use CAMI. Stick with the number on the package.
Which Grit Do I Start With
Your starting grit depends entirely on what's already on the floor:
| Floor Condition | Start At | Full Sequence |
|---|---|---|
| New / unfinished hardwood | 60 | 60 → 80 → 100 → 120 screen |
| Light wear, finish intact | 60 | 60 → 80 → 100 → 120 screen |
| Standard refinish (1–2 coats poly) | 36 | 36 → 60 → 80 → 100 → 120 screen |
| Heavy poly / multiple coats | 36 | 36 → 60 → 80 → 100 → 120 screen |
| Paint on wood floors | 24 or 36 | 24 → 36 → 60 → 80 → 100 → 120 screen |
| Shellac / old varnish / adhesive | 24 or 16 | 16/24 → 36 → 60 → 80 → 100 → 120 screen |
| Screen & recoat (light refresh) | 120–150 | 120 or 150 screen only (buffer) |
| Between coats of poly | 180–220 | 180 or 220 screen only (buffer) |
The test: Put a 36-grit belt on the drum sander and sand a 4×4-foot test area in the worst part of the floor. If the test patch comes out completely bare and clean — even at board edges — then 36 is your starting grit. If it's not clean, drop to 24. Most pre-1950 floors with multiple layers of old finish need a 24-grit start on 110-volt rental sanders.
Grit Selection by Material
Wood (Hardwood Floors, Furniture, Decks)
Hardwood floors use the full drum sander sequence (36–100 on the drum, 120+ on the buffer). Furniture uses the same grit logic with handheld orbital sanders — start at 80 on bare wood, 60 if removing finish. See our furniture sanding guide and deck sanding guide.
Drywall
Entirely different from wood — you're smoothing joint compound, not removing material. Start at 120 for rough shaping, 150 for final smoothing. Never go below 120; coarser grits tear the paper face. Use a pole sander, not a drum sander. See our drywall sanding guide.
Metal
Uses silicon carbide or zirconia abrasives rather than aluminum oxide. Start at 80 for rust removal, 120–180 for smoothing, 220–400 for pre-paint prep. Wet sanding with silicon carbide prevents heat buildup. See our sandpaper types guide.
Paint Removal
Start coarser than a standard refinish — typically 24 or 36 grit. Latex paint clogs sandpaper faster than polyurethane; budget 50% more sheets. Important: Test for lead paint before sanding any pre-1978 house. See our paint removal guide.
How Many Sheets Do You Need
For a standard 200 square foot room:
| Abrasive Type | Per Grit | Total (4-grit sequence) |
|---|---|---|
| Drum sander sheets (8×19.5") | 3–4 sheets | 12–16 sheets |
| Edger discs (7") | 4–6 discs | 16–24 discs |
| Buffer screens (17" or 20") | 2–3 screens | 2–3 screens (one grit only) |
Always buy 20% extra. Running out mid-job means stopping, driving to the store, and a visible line where you paused. See our Clarke DU-8 sheet guide and 7-inch edger disc guide for product recommendations.
Frequently Asked Questions
What grit should I start with for floor sanding?
Start at 36 if sanding through old polyurethane or paint. Start at 60 on raw wood. See the decision tree above.
What grit before applying stain?
Run 100 on the drum, then screen at 120 or 150 on the buffer. The buffer pass creates a uniform scratch pattern that absorbs stain evenly.
What grit between coats of polyurethane?
180–220 grit on a buffer or by hand. You're scuffing for adhesion, not removing wood.
Can I skip 60 grit and go from 36 to 80?
No. The 80 grit can't erase 36-grit scratches — they'll show under finish. Always include 60.
Does wood species affect which grits I use?
Species affects sheet life, not grit selection. The sequence is the same for oak, maple, hickory, cherry, and walnut. Harder species just dull sheets faster.
What's the difference between sanding screens and sandpaper?
Screens are open-mesh abrasive for buffers — dust falls through so they don't clog. Sandpaper is solid-backed for drum sanders and edgers. Don't interchange them.
Related Guides
- How to Sand Hardwood Floors with a Rental Sander
- Best Sandpaper for Hardwood Floor Refinishing
- Best Drum Sander Sheets 8×19.5
- Clarke EZ-8 Sandpaper Size Guide
- Clarke Super 7R Edger Disc Size Guide
- Floor Sanding Edger Discs 7-Inch
- Floor Sanding Troubleshooting
- 80 Grit vs 100 Grit
- Sandpaper Types Explained
- Removing Paint from Wood Floors
- Drywall Sanding Guide
- Lagler Hummel Belt Sander Guide
Affiliate Disclosure: Professional Sandpaper Guide participates in the Amazon Services LLC Associates Program. We earn from qualifying purchases at no additional cost to you.